BX-0Pilot handbook

Basics / Start here

Your first flight

Prepare an expedition, learn the controls, and make your first warp.

Welcome to the field guide. This is the web edition of the field guide. Return to Branch X-0.

A good place to start

  1. Prepare an expeditionChoose a hull, check its fit, and pick an open system.
  2. Control your shipFind the thruster and the ship's AI state.
  3. Learn to flyMove the camera and give a deliberate flight command.
  4. Make a warpInspect a destination and check the travel options.

Find your way around

WhereWhat to look for
StationCarrier and hangar ship cards, fitting, the star map, and deployment.
Flight controlsThe ship you control, its thrust and speed, and AI state.
Fleet barYour ships. Tap to switch ships; hold to inspect a ship.
RadarContacts and categories. Select an object to inspect its available actions.

Your first session

Start with controlled flight and a warp within your chosen system. Combat is optional. You can reopen this handbook as often as you need.

B-16 systems have no hostile NPCs. Other players can still be a threat.

Basics / Prepare an expedition

Prepare an expedition

Choose a ship and a destination before leaving the station.

At the station

  1. Tap the carrier card to review its fit and hangar capacity.
  2. Use + ADD SHIP to prepare a ship for the hangar, or tap an existing ship card to edit it.
  3. Choose a hull and loadout, then use Apply. Save stores a template.
  4. Check each ship's queue letter, A to E. Tap the letter to move it to the next reinforcement queue.
  5. Choose an open system on the star map and tap Deploy. If the carrier has unused hangar space, confirm with Deploy anyway.

Launch a ship

Deploy takes the carrier into the system with its ships docked. While flying the carrier, use Launch above the module rack to send the first ship of each queue into an empty fleet place. Tap its fleet button to take control.

To return, fly the carrier and use its Home control. Review the confirmation and the ships still outside before committing. Dock all calls the fleet back to the carrier.

Once in space, start with ship controls and basic flight.

Basics / Control ship

Control your ship

Know which ship receives your orders, and how to change its movement.

Check the ship you control

The flight controls show the current ship's speed, requested thrust, and AI state. A ship command applies to that ship.

Thrust

Tap the thruster button to toggle requested output between zero and full. Hold it to choose a preset or use the slider, then release to apply. Zero output keeps the current movement order; watch actual speed as the ship responds.

Give a direction

Double tap or double click a direction in space to fly toward it. Use an object's menu for Approach or Orbit.

A direct movement command can pause the ship's AI. Check the AI state before expecting it to take over again.

Basics / Control fleet

Control your fleet

Switch between your ships and check the scope of an order.

Find your ships

The fleet bar has five places for launched ships, Alpha to Echo, and the carrier's Hive place. Tap a living ship to switch to it. Hold its button to inspect its fit and AI settings.

Docked ships

While flying the carrier, its tubes show the five reinforcement queues. Tap a tube or an empty fleet place to inspect a queue. Launch fills empty places from the queues; Dock all calls the fleet back.

Ship orders and fleet orders

A ship command affects the ship you control. A fleet command can affect several ships. Read the action's scope before confirming an order.

Travel together

Before ordering a fleet warp, check which ships can follow. Distance, tackle, and the current situation can affect travel.

For individual movement, see Control ship. For travel, see Warp.

Fight / Targets and locks

Targets and locks

Find the intended object before committing to combat.

Inspect a contact

Select an object in space or in the radar. Review the target menu and confirm that you have the right ship or object.

Keep track of targets

Use the lock cards to follow targets and their state. The radar gives you a broader view of contacts around you.

Start with movement

Get comfortable with ship controls and Approach and Orbit before adding weapons and multiple targets.

Fight / Weapons and modules

Weapons and modules

Understand the fit you brought before activating its modules.

Review your fit

Inspect your ship's fitting and read what each fitted module does. The controls available in flight depend on that fit.

Check your target

Before using an offensive action, confirm the intended target and review the state shown by the game.

Watch the situation

Follow module state, capacitor, and the target's response. Keep movement and ship control in mind while fighting.

Fight / Defence and capacitor

Defence and capacitor

Watch the ship as a whole, rather than only its target.

Your ship's condition

The flight display shows shield, armour, structure, and capacitor. Check these while giving combat orders.

Know your modules

Review the fit's defensive and energy-related modules before deploying. Read the module information when deciding how to use them.

Keep an exit in mind

Movement and travel can be affected by the situation. Inspect the available options rather than assuming a warp will always succeed.

Mining / Overview

Mining

Give a mining ship a Mine order and watch its ore hold fill.

Prepare a miner

At the station, choose a mining hull and check its mining module and cargo holds before deploying. Fitted cargo holds share one capacity.

Start mining

  1. Find a belt or asteroid with the radar and travel to it.
  2. Select an asteroid and choose Mine for a suitable ship.
  3. Watch the readout above the ship's name: Positioning, Mining, then Hold full · ore going home.

Check your cargo

Tap Hold N% in the mining readout or the cargo-hold cell in the module rack. The cargo panel shows capacity, each ore held, and recent cycle yields.

A full hold sends its ore home automatically while the ship waits, then mining resumes. Ore still aboard is lost with the ship. Ore stored at home has no use until the economy is implemented.

Mining continues while you read Help. Return to game to monitor your ship and react to threats.

Mining / Asteroids and belts

Asteroids and belts

Find a resource location, then inspect the rocks inside it.

Find a location

The radar has categories for asteroids, belts, and rare ore. Select a location and inspect its travel actions. Use Warp for a distant destination.

Inspect a rock

Select an asteroid to see its remaining ore and the shares of its ore types in the details strip. These details do not need a target lock.

Keep working

A Mine order moves the ship into position and runs its mining module. When its rock is depleted or gone, it looks for another workable rock in the same area. Check the mining readout and give a new order when you want to move elsewhere.

Missions / Overview

Planned

Missions

A place for guided objectives and mission reference.

Not available yet. Missions are planned. This section will grow with the mission system.

Start with the basics

For a first session today, follow Your first flight: prepare an expedition, practise control, and make a warp.

Missions / Objectives

Planned

Following objectives

The future guide to reading and completing a mission.

Guide planned. Objective tracking and mission instructions will be documented when those activities are available.

Useful preparation

Learn fleet control and warp travel so you can focus on the objective when missions arrive.

Ship assistance AI / Overview

Ship assistance AI

Understand who is controlling the ship before you give an order.

Check the current state

The flight controls show your ship's AI state. Check it when you switch ships or finish giving direct orders.

Inspect a ship's settings

Hold a ship's button in the fleet bar to inspect its fit and AI settings. AI is available on every ship without fitting a CPU module. Review its aggression, range, target priorities, defence preset, and retreat plan.

Direct movement can pause the ship's AI. Do not assume it has resumed until you have checked the state.

Ship assistance AI / Behaviour and settings

Behaviour and settings

Review the ship's settings alongside the fit they control.

Inspect before deploying

A ship's fit and its AI settings belong together. Review both while preparing an expedition.

Behaviour choices

Open the AI settings to review aggression, combat range, orbit drive, target classes, pre-lock, defence preset, and retreat options. Each ship has the same settings; its fit determines what it can perform.

Check the result

After making a change, return to flight and watch what the ship does. Keep its current orders and AI state in view.

Ship assistance AI / Manual control and AI

Manual control and AI

Give direct orders deliberately, then check who is in control.

Direct movement

Double tap or double click a direction to give a movement order. This can pause the ship's AI.

Hand control back

Check the AI state before expecting autonomous behaviour. Review the ship's settings if it does not behave as you expected.

When switching ships

Confirm the ship you control after using the fleet bar. Keep ship commands separate from fleet commands.

See Control ship and Control fleet for the basic controls.